Non-Destructive Training

Chicago

IMTE Training Institute Pvt. Ltd. – A world class Non-Destructive testing training and certification institute in Faridabad, India serving clients & participants from over 12 branches.
Ndt testing course is intended for those wanting to achieve a basic understanding of the methods, techniques and role of non-destructive testing in the engineering, fabrication and construction industries. IMTE Training Institute Pvt. Ltd. is a leading professional NDT training institute in Delhi NCR, India for its training and certification programs.
IMTE offers extensive hands on experience for basic tests to be performed. This course is ideal for beginners and can be orientated towards senior managers, consulting engineers, chief inspectors and surveyors, as well as those directly involved in starting a career in non-destructive testing activities who require an initial general approach.


Course Content
  • The main methods of non-destructive testing with demonstrations (including magnetic particle testing, penetrant testing, ultrasonic flaw detection and radiographic interpretation)
  • The limitations of each method of testing.
  • Radiographic testing (theory only)
  • Certification schemes
  • Relevant BS, EN and ISO standards/reference sources
  • Reporting criteria.

Special Notes

This is an ideal course for personnel at all levels wanting an overview of common NDT techniques. NDT methods applicable :


Radiographic Testing.

This is a course suitable for all who require an in-depth knowledge of the radiographic interpretation of welds. The course concentrates on the identification of weld defects, assessment of radiographic quality and sentencing to example specifications. All information necessary for candidates attempting ASNT radiographic interpreters examinations is issued.


Course Content
  • Properties and production of X and gamma rays.
  • The formation of a latent image.
  • Radiographic film.
  • Development/processing.
  • Practical exercises cover:
  • Identification of weld,casting & forging types.
  • Identification of defects.
  • Assessment and measurement of
  • Radiographic quality
  • Sentencing to specifications
  • Image quality
  • Radiographic techniques
  • Weld technology
  • Interpretation of radiographs
  • Specifications

Pre-requisites for attending this course:

If attempting an ASNT examination the requirements of your company's written practice must be met.


Ultrasonic Introduction

This course offers a high practical content and relevant theoretical background to enable students to achieve a basic understanding of ultrasonic inspection.

Candidates on completion of the course will be able to calibrate a flaw detector with both compression and shear wave probes, record accurate thickness measurements and locate and size laminations in steel plate. In addition students will be able to select the correct compression/shear wave probes for the examination of welded butt joints, locate and size defects and finally produce acceptable reports.


Course Content
  • Basic concepts
  • Nature of sound
  • Relevant formulae
  • Wave propagation
  • Types of display
  • Operation of flaw detectors
  • Probes
  • Couplants
  • Defect location and sizing methods
  • Relevant BS and EN standards
  • Use of plotting systems
  • Reporting methods
  • Welding, casting and forging methods (background knowledge)
  • Defects associated with the above processes.

Pre-requisites for attending this course:

If attempting an ASNT examination the requirements of your company's written practice must be met.


Special Notes

A 5 day course for those with little or no knowledge or experience of ultrasonic techniques


Ultrasonic Testing Practical - (Revision/Upgrade)

A course for those who already have a basic understanding of the techniques of ultrasonic inspection and want intensive instruction to improve their knowledge and increase their experience. The course is suitable for candidates who are wishing to progress towards any of the examination qualifications. The course has a high practical content; all equipment is provided.


Course Content
  • Revision of basic techniques
  • Probe identification
  • Test sensitivity
  • Equipment checks
  • Geometry/ultrasonic technique selection
  • Defect response
  • Practical exercises on a wide variety of weldments
  • Defect sizing methods.

Special Notes

An ideal course for candidates wishing to improve their skills in the practical use of ultrasonic test methods on weldments. This course provides the option of single or multiple days and provides a very flexible option for candidates undertaking ultrasonic training covering both welds and/or wrought products.


Ultrasonic Testing Phased Array -

This course provides detailed instructions on the inspection of Ferritic welds / castings/ wrought products by the use of Phased Array Ultrasonic testing. This course is only suitable for holders of current, valid UT certification, approved and accepted by ASNT.

This course is ASNT recognised and provides excellent preparation for the level 2 examinations. It meets in full the training hour requirements as specified by the relevant ASNT documentation.

The course is 12 days long with a 2 day examination after completion.


Course Content
  • Principals of Phased Array Probes
  • Principals of Inspection Sensitivity
  • Phased Array Instrumentation
  • Scanning with Phased Array
  • Calibration and Checks
  • Software for data collection
  • Software familiarity
  • Procedures for verification of flaw existence and position
  • Use of software tools
  • Data Analysis.

Pre-requisites for attending this course:

If attempting an ASNT examination the requirements of your company's written practice must be met.


Magnetic Particle Testing

This course provides detailed theoretical and practical information on all the commonly encountered magnetic particle testing techniques. Candidates will have the opportunity to use a large variety of equipment on welds, castings and wrought products. This course is suitable for beginners and personnel with an existing NDT knowledge. This course is ASNT recognised and provides excellent preparation for Level 1 and 2 examinations. It meets, in full, the training hour requirements as specified by the relevant ASNT documentation.


Course Content
  • Properties of magnetic fields.
  • Principles of magnetic particle
  • inspection
  • Magnetic particle inspection equipment
  • Equipment calibration
  • Defect detection and evaluation
  • Magnetic particle inspection techniques
  • Relevant standards
  • PCN documentation
  • Extensive hands-on practical element

Pre-requisites for attending this course:

If attempting an ASNT examination the requirements of your company's written practice must be met.


Penetrant Testing

This course provides detailed theoretical and practical information on all the commonly encountered penetrant testing techniques. Candidates will have the opportunity to use the various techniques on welds, castings and wrought products.

This course is suitable for beginners and personnel with an existing NDT knowledge. This course is ASNT recognised and provides excellent preparation for Level 1 and 2 examinations. It meets, in full, the training hour requirements as specified by the relevant ASNT documentation.


Course Content
  • Introduction to the penetrant method
  • Principles of penetrant inspection
  • Penetrant inspection equipment
  • Performance checking
  • Defect detection and evaluation
  • Penetrant techniques
  • Relevant standards
  • PCN documentation
  • Extensive hands-on practical element

Pre-requisites for attending this course:

If attempting an ASNT examination the requirements of your company's written practice must be met.


Eddy Current Testing

This course provides detailed information on inspection of welds utilising the Eddy Current Testing method, incorporating the latest equipment.

This course is suitable for beginners and personnel with an existing NDT knowledge. This course is ASNT approved and provides excellent preparation for the level 1 examination as specified by the relevant ASNT documentation.


Course Content
  • Electrical properties
  • Principals of magnetism
  • Principals of electromagnetism
  • Eddy Current inspection equipment
  • Equipment calibration
  • Defect detection and evaluation
  • Eddy Current techniques
  • Extensive Hands-on experience
  • Relevant Standards
  • ASNT documentation

Visual Testing

These courses have been designed to provide a full appreciation of the methods and practices of visual testing. A high theory and practical content is offered within these courses in preparation for either ASNT Level 1 or ASNT Level 2 examinations. The courses meet the relevant training hour requirements as specified in the relevant ASNT document.


Course Content
  • Definitions
  • Vision
  • Lighting
  • Environmental factors, direct and indirect methods of visual assessment
  • Visual inspection equipment
  • Surface conditions
  • Inspection and testing criteria
  • The reporting of results
  • Codes and standards
  • Product technology (welds, castings, wrought), in-service and secondary process defects.

Special Notes

The Level 1 course consists of the first two days of the 5 day course programme.



Our training program is as per SNT-TC-1A standard by ASNT(American Society for Non-Destructive Testing) as well as.

We provide training upon EN; ISO-9001:2008 as per requirement.